2
Magpul M-LOK 7 Slot Aluminum Rail
$18.99
0days
0hours
0minutes
0seconds
Designed for use with all M-LOK compatible Hand Guards and Forends, our M-LOK Aluminum Rail Sections (7 Slots) allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. 7 Slots, max overall length of 3.3″.Machined from Mil-Spec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
1 in stock
Compare
Be the first to review “Magpul M-LOK 7 Slot Aluminum Rail”
You must be logged in to post a review.
Related products
-
AR57 ULT Upper Receiver Assembly, 5.7x28mm,16in Barrel, 1/2×28 Thread, AR57-ULT16
$849.00Add to cart0days0hours0minutes0seconds
$849.00AR57 ULT Upper Receiver Assembly, 5.7x28mm, 16in Barrel, 1/2×28 Thread, AR57-ULT16. This AR57 AR57 Upper Receiver Assembly converts any AR-15 lower to a rifle capable of shooting 5.7×28 ammunition. The unique upper design of these AR15 Upper Receivers loads from the top and ejects downward through the AR-15 mag well. The new generation upper has a stronger lighter and more streamlined rail; finished with a beautiful ultra-smooth melanite black coating. Convert your AR-15 type rifle to shoot the same 5.7×28 ammo as the legendary FN P-90 PDW This AR57 Upper is constructed with a steel barrel muzzle brake bolt carrier group buffer and screws all built into an alloy monobloc receiver. In other words it is ready to drop in and push pin. It is also built as solid as a tank. A single block of Aircraft Grade 7075 T6 aluminum referred to as Kryptonite Monobloc and rated at 83000 PSI strength is used for the receiver and its component rails. Precision milled to within.002 tolerance this upper is chambered in 5.7 x 28 mm. The barrel is 16 inches with a perforated muzzle brake attached on 1/2 x 28 threads making the overall length 18 inches; the bore is six groove right hand 1:8.5 FN twist. The sight system is a 13 slot Picatinny over the operating handle with 3-slot upper and lower forward rails. The metal parts including receiver rail barrel and bolt are melanite treated for a hard durable finish. Bolt is made from 8620 alloy. The receiver and rail block measures just over 17 inches overall length; from the receiver back to the muzzle end the total length is 24 9/16 inches. In contrast to many other receivers there is no gas system to become clogged with carbon or fouling; the chamber stays clean well beyond extended shooting. Extremely reliable simplicity is key with the free sliding bolt being the only moving element and its easy removal makes maintenance literally a snap. The AR-57 system ejects spent rounds through the lower’s magazine well. Does not include the magazine. Specifications for AR57 ULT 16in Barrel 5.7x28mm Upper Receiver Assembly: Manufacturer: AR57 Caliber: 5.7x28mm Overall Length: 18 in Barrel Length: 16 in Threads per Inch: 1/2×28 Muzzle Device: Flash Hider Fabric/Material: 8620 Alloy Gun Rail: M-LOK Gun Type: Shotgun Condition: New Magazine Included: No Package Contents: AR57 ULT 16in Barrel 5.7x28mm Upper Receiver Assembly AR57 AR57-ULT16: ULT Upper Receiver Assembly 5.7x28mm 18in 16in Barrel 1-8.5 Twist 1/2×28 Thread.
1 in stock
Quick ViewQuick View -
Pre Owned PX9 lower
$100.00Add to cart0days0hours0minutes0secondsQuick ViewQuick View -
Battle Arms Development Enhanced Pivot/Takedown Pin Set, Titanium, BAD-EPS-Ti
$44.99Add to cart0days0hours0minutes0seconds
$44.99Battle Arms Development Enhanced Pivot/Takedown Pin Set, Titanium, BAD-EPS-Ti. These Battle Arms Development AR15 Takedown & Pivot Pins feature a bullet tip guide that uses state-of-the-art technology to prevent accidental slippage of the bullet or tool which could cause damage to the receiver. In addition some of these Battle Arms Development Enhanced Pivot Pin Set models have an EZ guide channel & magnetic assist installation which is the most hassle-free and quick kit on the market. The Battle Arms Development Takedown Pin Set is the perfect addition to any M16 enthusiast’s arsenal who demands accuracy and perfection on and off the shooting range. Specifications for Battle Arms Development AR-15/AR-10 Enhanced Pivot/Takedown Pin Set: Manufacturer: Battle Arms Development Condition: New Trigger Pin Size: Mil-Spec Weight: 0.74 oz Features of Battle Arms Development AR-15/AR-10 Enhanced Pivot/Takedown Pin Set: Precision Swiss CNC machined; Patent Pending Pivot Pin & Take-down Pin Head Designs – Greatly improved gripping surface and pull strength without the use of oversize heads; Low Profile Pin Heads – Low drag and never in the way. Lower profile than mil-spec pin heads; Ambidextrous Safety Compatible – The Enhanced Take down Pin (BAD-ETP) head design does not obstruct the use of the right side ambidextrous safety selector lever; Extended Pin Tips (+0.030in over mil-spec) – Added tip length noticeably aids in starting/pushing the pins out from the left side of the receiver without undue protrusion; Bullet Tip Guide – Cone shaped recess at both pin tips prevent accidental bullet or tool slip and reduced the chance of scratching/damaging of the receiver Package Contents: Battle Arms Development AR-15/AR-10 Enhanced Pivot/Takedown Pin Set (1) Enhanced Takedown Pin (1) Enhanced Pivot Pin (2) KNS hardened stainless steel detents (2) 17-7 nickel plated stainless steel pin springs. Battle Arms Development BAD-EPS-Ti: Enhanced Pivot/Takedown Pin Set Titanium.
1 in stock
Quick ViewQuick View -
Faxon AR Gas Tube Rifle Length SS
$19.99Add to cart0days0hours0minutes0secondsQuick ViewQuick View
Reviews
There are no reviews yet.