4
FN AR-15 Button Rifled Barrel 16" OAL M4, Carbine Length Gas System, 5.56x45mm
Magpul M-LOK 7 Slot Aluminum Rail
Be the first to review “Pre Owned PX9 lower”
You must be logged in to post a review.
Related products
-
Magpul Enhanced Ejection Port Cover
$15.99Add to cart0days0hours0minutes0seconds
$15.99873750-MAG1206The Enhanced Ejection Port Cover is a drop-in upgrade designed to provide an improved installation process, physical strength, and corrosion resistance over the standard USGI ejection port cover. Traditional stamped-steel ejection ports are malleable, prone to corrosion, and require tools to install. The Enhanced Ejection Port Cover snaps into place easily without having to remove your hand guard or barrel nut, wind any loose springs, or adjust small e-clips. Constructed of impact-resistant injection molded polymer, it is corrosion resistant and will not bend or deform from impacts. Compatible with USGI-pattern AR15 upper receivers that accept USGI ejection port covers.
1 in stock
Quick ViewQuick View -
Luth-AR Takedown Pin Detent with Spring, 10 Pack, LR-15A-10
$20.49Add to cart0days0hours0minutes0seconds
$20.49Luth-AR Takedown Pin Detent with Spring, 10 Pack, LR-15A-10. Unlike most detents on the market this one is made from a Bronze Alloy and is not affected by extremes of heat and cold. If you’re looking for a high-quality dependable part look no further than our Tactical Takedown Detent. This detent is made to last forever and we hold to the highest quality standards If you’re looking for a solid one-piece attachment for your Tactical Takedown look no further than our Tactical Takedown Detent. This one-piece detent easily installs with the included installation tool; no gunsmithing required Where did you put it? That’s where. Specifications for Luth-AR Takedown Detent: Manufacturer: Luth-AR Color: Bronze Package Contents: Luth-AR Takedown Detent LR-14 Detent Spring 10-ea. LR-15 Takedown Detent 10-ea. Luth-AR LR-15A-10: Takedown Pin Detent with Spring 10 Pack.
1 in stock
Quick ViewQuick View -
AR57 ULT Upper Receiver Assembly, 5.7x28mm,16in Barrel, 1/2×28 Thread, AR57-ULT16
$849.00Add to cart0days0hours0minutes0seconds
$849.00AR57 ULT Upper Receiver Assembly, 5.7x28mm, 16in Barrel, 1/2×28 Thread, AR57-ULT16. This AR57 AR57 Upper Receiver Assembly converts any AR-15 lower to a rifle capable of shooting 5.7×28 ammunition. The unique upper design of these AR15 Upper Receivers loads from the top and ejects downward through the AR-15 mag well. The new generation upper has a stronger lighter and more streamlined rail; finished with a beautiful ultra-smooth melanite black coating. Convert your AR-15 type rifle to shoot the same 5.7×28 ammo as the legendary FN P-90 PDW This AR57 Upper is constructed with a steel barrel muzzle brake bolt carrier group buffer and screws all built into an alloy monobloc receiver. In other words it is ready to drop in and push pin. It is also built as solid as a tank. A single block of Aircraft Grade 7075 T6 aluminum referred to as Kryptonite Monobloc and rated at 83000 PSI strength is used for the receiver and its component rails. Precision milled to within.002 tolerance this upper is chambered in 5.7 x 28 mm. The barrel is 16 inches with a perforated muzzle brake attached on 1/2 x 28 threads making the overall length 18 inches; the bore is six groove right hand 1:8.5 FN twist. The sight system is a 13 slot Picatinny over the operating handle with 3-slot upper and lower forward rails. The metal parts including receiver rail barrel and bolt are melanite treated for a hard durable finish. Bolt is made from 8620 alloy. The receiver and rail block measures just over 17 inches overall length; from the receiver back to the muzzle end the total length is 24 9/16 inches. In contrast to many other receivers there is no gas system to become clogged with carbon or fouling; the chamber stays clean well beyond extended shooting. Extremely reliable simplicity is key with the free sliding bolt being the only moving element and its easy removal makes maintenance literally a snap. The AR-57 system ejects spent rounds through the lower’s magazine well. Does not include the magazine. Specifications for AR57 ULT 16in Barrel 5.7x28mm Upper Receiver Assembly: Manufacturer: AR57 Caliber: 5.7x28mm Overall Length: 18 in Barrel Length: 16 in Threads per Inch: 1/2×28 Muzzle Device: Flash Hider Fabric/Material: 8620 Alloy Gun Rail: M-LOK Gun Type: Shotgun Condition: New Magazine Included: No Package Contents: AR57 ULT 16in Barrel 5.7x28mm Upper Receiver Assembly AR57 AR57-ULT16: ULT Upper Receiver Assembly 5.7x28mm 18in 16in Barrel 1-8.5 Twist 1/2×28 Thread.
1 in stock
Quick ViewQuick View -
Battle Arms Development Enhanced Pivot/Takedown Pin Set, Titanium, BAD-EPS-Ti
$44.99Add to cart0days0hours0minutes0seconds
$44.99Battle Arms Development Enhanced Pivot/Takedown Pin Set, Titanium, BAD-EPS-Ti. These Battle Arms Development AR15 Takedown & Pivot Pins feature a bullet tip guide that uses state-of-the-art technology to prevent accidental slippage of the bullet or tool which could cause damage to the receiver. In addition some of these Battle Arms Development Enhanced Pivot Pin Set models have an EZ guide channel & magnetic assist installation which is the most hassle-free and quick kit on the market. The Battle Arms Development Takedown Pin Set is the perfect addition to any M16 enthusiast’s arsenal who demands accuracy and perfection on and off the shooting range. Specifications for Battle Arms Development AR-15/AR-10 Enhanced Pivot/Takedown Pin Set: Manufacturer: Battle Arms Development Condition: New Trigger Pin Size: Mil-Spec Weight: 0.74 oz Features of Battle Arms Development AR-15/AR-10 Enhanced Pivot/Takedown Pin Set: Precision Swiss CNC machined; Patent Pending Pivot Pin & Take-down Pin Head Designs – Greatly improved gripping surface and pull strength without the use of oversize heads; Low Profile Pin Heads – Low drag and never in the way. Lower profile than mil-spec pin heads; Ambidextrous Safety Compatible – The Enhanced Take down Pin (BAD-ETP) head design does not obstruct the use of the right side ambidextrous safety selector lever; Extended Pin Tips (+0.030in over mil-spec) – Added tip length noticeably aids in starting/pushing the pins out from the left side of the receiver without undue protrusion; Bullet Tip Guide – Cone shaped recess at both pin tips prevent accidental bullet or tool slip and reduced the chance of scratching/damaging of the receiver Package Contents: Battle Arms Development AR-15/AR-10 Enhanced Pivot/Takedown Pin Set (1) Enhanced Takedown Pin (1) Enhanced Pivot Pin (2) KNS hardened stainless steel detents (2) 17-7 nickel plated stainless steel pin springs. Battle Arms Development BAD-EPS-Ti: Enhanced Pivot/Takedown Pin Set Titanium.
1 in stock
Quick ViewQuick View
Reviews
There are no reviews yet.