ThunderBeast Ultra 7CB Suppressor FDE MFG #ULTRA-7-CB
The Ultra 7 is their highly efficient compact precision rifle suppressor. It is best for applications where acompact form factor is important but excellent suppression is still requried. The Ultra 7s is available in .30 caliber and 6.5mm caliber. The .30 caliber version is best for maximum flexibility for .223 up to .300 RUM.
The Ultra 7 will supress a typical .308 bolt-action rifle down to approx 134-136 dB. When shot on a .260 Remington or 6.5 Creedmoor, the 6.5mm Ultra 7 is 2-3dB quieter than the .30 caliber Ultra on the same rifle, and as quiet or quieter than a .30 cal Ultra 9. It also has very little or no "first round pop" (FRP) in most applications. The Ultra 7 weighs just 9.7oz.
The Ultra series represents a revolutionary improvement in titanium precision rifle suppressors. They took everything they've learned over the last half decade building the best precision rifle suppressors in the world and put it into the Ultra design. The Ultra series offers unprecedented lightweight and class-leading suppression levels.
Compared to the prior 30P-1/30CB9 series, the Ultra series is 25-30% lighter, 4-5dB quieter, and much stronger. The Ultra series holds the same precision and repeatability as the 30P-1/30CB series.
With the CB mount, the suppressor mates to a conical shoulder on the brake and locks up rock solid and extremely tight. In direct thread configuration, the Ultra suppressors use a heat-treated 17-4 thread insert and initial blast shield. The Ultra series suppressors also have the flexibility to be changed from direct thread to CB mount and vice versa via a simple facotry service operation, in case your needs change. This is accomplished by removing or replacing the default brake from the direct thread version.
The Ultra series is constructed of titanium with a fully-welded core. This material and construction provide a great strength to weight ratio. It can take whatever your precision rifle can dish out.
The Ultra baffle stack was completely redesigned, but retains the priciples that made the 30P-1 stack such a great precision and long-range suppressor. Thunder Beast Arms Corp suppressors have racked up impressive results at long-range field shooting events nationwide, and have been the most popular suppressor used in the Precision Rifle Series for three years running.
Many long-range shooters prefer shooting suppressed because the muzzle blast and concussion is eliminated, while the recoil impulse is reduced and smoothed out over time. The net result is that the rifle is easier to shoot and it's easier to make hits. Communication with your spotter is easier becuase the need for hearing protection is reduced.
The .30 cal Ultra was designed around .308 for maximum flexibility and is rated up to .300 Winchester Magnum (18" barrel), but it's the ideal suppressor for the most competitive mid-sized cartridges for long-range shooting such as .243 Winchester .260 Remington, 6.5 Creedmoor, 6.5x47 Lapua, 6.5-284 Norma, and 7mm Remington Magnum & WSM.
Special Features:
- Direct Thread Attachment Option
- CB series muzzle brake and flash hider attachment option
- Ionbond DLC coating on CB muzzle devices
- Conical shoulder surface on CB mount
- 100% titanium construction
- 360-degree fully-welded baffle core
- Helical Baffle Technology
- Magnum rated
- Rock-Solid POI Repeatability
The Ultras were designed to be the "ultimate" lightweight precision rifle suppressor. This means they used materials to meet those goals. Titanium, even Grade 5, is ultimately limited by temperature. The Ultras are very strong but excursions above 800 degrees, it will get too weak to sustain the blast and you would eventually get a failure. They recommend keeping the Ultra series less than 800 degrees.
Full auto by itself does not really increase the pressure or stress on the can, it's the heat energy input in combination. Full auto or bursts would be fine on an Ultra as long as the material temperature does not exceed that 800 degree safety mark. In their testing, one magazine fired rapid (mag-dump) from an AR10 or AR15 does not exceed 800 degrees. Keep in mind this is firing at a full-auto-like rate. at that point you'd just have to let it cool. The second magazine may or may not cause it to exceed it depending on ambient conditions, loads, barrel length, etc. A shorter barrel will cause more heat input into the suppressor and its temperature will rise faster.
Specifications:
- Caliber: .30 caliber, up to .300 RUM
- Material: Titanium
- Length: 7"
- Diameter: 1.5"
- Mounts: CB series brake or flash hider, and Direct Thread
- Weight: 9.7oz
- Threads: 1/2-28, 5/8-24, 9/16-24, 3/4-24, 3/4-28, M18x1.0, M18x1.5
- Finish: FDE
- Brake Material: Heat-Treated 17-4 Stainless
- Brake Finish: Ionbond DLC
- Use: Precision/Long-range rifle, bolt or semi-auto
